KGS-1060

Industrial Managed 10-Port L2 Gigabit Ethernet Switches with 2 dual-speed SFP Slots

KGS-1060

Industrial Managed 10-Port L2 Gigabit Ethernet Switches with 2 dual-speed SFP Slots
360 Viewer

The KGS-1060 series is an 10-portt industrial managed Gigabit Ethernet switch which is featured with the following switched ports:
– Eight 10/100/1000Mbps Gigabit copper ports
– Two dual-speed SFP slots for 100Base-FX 1000Base-X

Key Features:

  • Eight 10/100/1000Mbps RJ-45 and two dual-speed SFP slots
  • All copper ports support auto-negotiation and auto-MDI/MDI-X detection
  • Two SFP slots support dual speed for 100BASE-FX and 1000BASE-X SFP transceivers
  • Full wire speed forwarding
  • Supports 802.3x flow control for full-duplex and backpressure for half-duplex
  • Port link aggregation function with LACP support
  • Supports SFP with Digital Diagnostic Monitoring (DDM)
  • Alternatively powered via PoE if direct DC power not available

 

Management Features:

  • Management:
    HTTP/HTTPS/SSHv2/CLI telnet/CLI console/SNMP v1/v2c/v3/RMON
    DHCP/DHCPv6 client, DHCP relay, DNS client. NTPv4
    IPv6 support, System Syslog, Configuration down/upload, Software upload
    HTTPS with TLS 1.2/1.3 support
  • Security:
    NAS, 802.1X, MAC-based/Web/CLI authentication, TACACS+, IP source guard
  • Layer 2:
    802.1Q/MAC-based/Protocol-based/Private/IP subnet VLAN, Port Isolation
    Storm control for UC/MC/BC packets, Static MAC configuration
    IGMP v2/v3 snooping, MLD v1/v2 snooping, DHCP snooping, Port mirroring
    Multiple Spanning Tree – MSTP, RSTP, STP
    QoS – 8 QoS classes, Tag-based & DSCP-based classification
  • KTI’s Auto Multi-Ring (KAMR) Technology:
    Fast failover response time, Auto recovery when failure is repaired
    Supports up to five redundant rings, Works with RSTP network
Standard IEEE 802.3, 802.3ab, 802.3z, 802.3x, 802.3at, 802.1x, 802.1w, 802.1D, 802.1Q
Network Ports 8 10/100/1000Mbps Gigabit copper ports, 2 1G/100Mbps SFP slots
Copper Port Shielded RJ-45, 10/100/1000Mbps, auto-negotiation, auto-MDI/MDI-X
Mini-GBIC SFP SFP connector, Interface: 1000BASE-X and 100BASE-FX support
Console Connector: Shielded RJ-45, Interface: RS-232
Network Cables 10/100/1000Mbps copper: Cat.5, 5e or higher up to 100m
1000Base-X: 62.5/125µm, 50/125µm MM fiber, 9/125µm SM fiber
Power over Ethernet IEEE 802.3at compliant (High power PoE)
PSE on Port 1 ~ Port 4
30W max. at port output for Cat.5 distance of 100 meters
MAC Addresses 8K
LED Indication Per unit: Power, Management status
Per port: Speed, link/activity status
Per SFP: Speed/link/activity status
Per PoE port: PoE status
Relay Output Alarm: power failure, specific port link fault
Interface: 2 terminal contacts (30VDC/1A max. or 120VAC/0.5A max.)
DC Power Input Screwed terminal block: 2 pairs of +/- contacts
Operating voltage range: +7 ~ +60VDC
Voltage for PoE support: +45 ~ +57VDC
Powered via PoE PD port: Port 2
IEEE 802.3af & 802.3at compliant Class 3 (only KGS-1060)
Power Consumption 9W max. (Full load with no PoE support)
130W max. (Full load with 4 PoE+ max. output)
Housing Enclosed metal with no fan
Dimension 42 x 106 x 140 mm (WxDxH)
Mounting Support DIN-Rail, Panel Mounting (Optional)
Environment Operating Temperature: -40°C ~ 70°C
Storage Temperature: -40°C ~ 85°C
Relative Humidity: 5% ~ 95% non-condensing
Approval FCC Class A, VCCI Class A, CE mark Class A, IEC 60950-1 safety
EN 61000-6-4 emission, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2 Immunity for industrial environment, IEC 60068-2-64 Vibration, IEC 60068-2-27 Shock 50G test, NEMA TS2 environment

Categories

Categories