KSD-800M

Home /Products/KSD-800M

Industrial Managed 8-Port L2 Fast Ethernet Switches with Fiber Connectivity

Industrial Managed 8-Port L2 Fast Ethernet Switches with Fiber Connectivity

Description

The KSD-800M series are managed 8-port full wire speed Fast Ethernet switches for industrial applications.

Key Features:

8 10/100M ports support auto-negotiation and auto-MDI/MDI-X configuration
Port 7 and Port 8 provide either copper or fiber connection (model dependent)
Provides wire speed store-and-forward switching
Supports IEEE 802.3x flow control for full-duplex operation
Supports Back-pressure flow control for half-duplex operation
Provides Far End Fault function on the fiber ports
Supports DHCP mode for IP configuration
Provides port-based, 802.1Q tag-based VLAN function
Provides port-based, 802.1p, DSCP QoS function
SNMP, telnet, Web management support
Supports industrial redundant ring configuration for quick recovery from cable fault or switch failure

Standard	IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, 100Base-FX
Network Ports	8 RJ-45 10/100Mbps auto-negotiation, auto-MDI/MDI-X ports 2 100Mbps 100Base-FX ports (model dependent) (Port 7 and Port 8 provide dual connectivities, either copper or fiber.)
Network Cables	10Base-T: Cat. 3, 4, 5 or higher up to 100m 100Base-TX: Cat. 5 or higher up to 100m 100Base-FX: MMF 50/125µm 60/125µm, SMF 9/125µm
VLAN function	Port-based, IEEE 802.1Q Tag-based
QoS function	Port-based, 802.1p-based, DSCP-based, IP match-based
Management	SNMP MIB-II and private MIB, telnet, web, event traps
MAC Addresses	Table with 1K entries
LEDs	Per unit: Power, Management Per 10/100M port: Link/Activity, 100M, Duplex/Collision status Per fiber port slot: Link/Activity status status
Relay Output	Alarm: Power failure Interface: 2 terminal contacts Spec.: 30VDC/1A max. or 120VAC/0.5A max.
DC Power Input	Screwed terminator block: 2 pairs of +/- contacts DC jack: -D 6.3mm/+D 2.0mm Operating voltage range: +7 ~ +30VDC
Power Consumption	7.3W max.
Housing	Enclosed metal with no fan
Dimension	40 x 106 x 140 mm (WxDxH)
Mounting Support	DIN Rail mounting, Panel mounting
Environment	Operating Temperature: -20°C ~ 70°C, Storage Temperature: -20°C ~ 85°C Relative Humidity: 5% ~ 95% non-condensing
Approval	FCC Class A, CE mark Class A, EN60950-1 safety