The 24-port Managed Gigabit Ethernet Switches are standard L2 switches that meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet specifications. The switches provide three 8-port modular slots. Each slot can accommodate one 8-port module. A variety of modules is available for selection.

Product Hightlights :

• Fully modular design with three 8-port module slots supporting Gigabit and Fast Ethernet
• A variety of optional modules is available for selection including Gigabit copper, Gigabit fiber, Gigabit mix of copper and fiber, and Fast Ethernet fiber
• The copper ports support 10/100/1000Mbps auto-negotiation and auto-MDI/MDI-X detection.
• The SFP port can support both 100Mbps fiber transceivers and Gigabit Ethernet SFP fiber transceivers
• Support connectivity for Fast Ethernet fiber, 100BASE-FX with SC/ST/BiDi/VF-45 transceivers
• Flexible installation with any combination of different modules in one rack
• Provides Gigabit full wire speed forwarding
• Supports power saving mode when port link down or different RJ-45 cable length.
• Supports 802.3x flow control for full-duplex and backpressure for half-duplex
• Supports console and in-band Web/Telnet/SSH/HTTPS/SNMP interfaces for switch management
• Supports configurable maximum frame length from 1518 up to 9600 jumbo frame
• Supports port-based ,802.1Q tag-based VLAN and private VLAN
• Provides QoS function
• Supports port bandwidth control for ingress and egress
• Supports packets storm control function for broadcast, unicast and multicast
• Supports MAC address learning, ageing and filtering control
• Supports LACP port link aggregation
• Supports IEEE 802.1d, 802.1w, 802.1s STP (Spanning Tree Protocol), RSTP, MSTP
• Provides port mirroring function
• Provides IP Multicasting with IGMP Snooping function
• Supports DHCP client for dynamic IP configuration
• Supports 802.1X port-based radius authentication for access security
• Provides ACL filtering function
• Provides port data rate control function
• Supports SNTP Client
• Supports LLDP
• Provides SNMP v1/v2C/v3 agent and event trap function
• Supports Configuration download and upload
• 19” rack mountable
• Both AC powered model and DC powered model are available for choice