KCD-400

Industrial 1000Base-T to 1000Base-X Gigabit Media Converters

KCD-400

Industrial 1000Base-T to 1000Base-X Gigabit Media Converters

The industrial KCD-400 media converter series provides industrial strength Gigabit Ethernet copper-to-fiber media conversion, allowing for 1000Base-T-to-1000Base-Xover multi-mode or optional singlemode fiber optical media. With the SFP (Mini-GBIC) connector design, the media converter not only supports existing variety of multimode and single mode fibers, but also preserves the flexibility to adapt to any change of your fiber network in the future.

Key Features:

  • Comply with IEEE 802.3ab 1000Base-T,802.3z 1000Base-SX/LX standard
  • Provide direct media conversion for Gigabit copper and Gigabit fiber
  • Support full wire speed conversion
  • Support transparent conversion of any packet types with no packet length limitation
  • Support auto-negotiation with link partners
  • Provide link fault pass through between copper and fiber link
  • Provide SFP on fiber port for mounting variety of fiber options
  • Low power consumption
  • Two power interface types: screw terminal block and DC Jack
  • Supports DIN-rail mounting and optional screwed plane mounting
Standard IEEE 802.3au, 802.3z
Conversion Direct 1000BASE-T to 1000BASE-X with minimum latency
Packet Types Transparent conversion with no modification to:
– Standard IEEE 802.3 Ethernet packet frames
– IEEE 802.1Q tagged packet frames
Copper Port Shielded RJ-45,1000Mbps
Auto-negotiation capable
Auto-MDI/MDI-X crossover function
Fiber Port SFP connector with pre-configured SFP fiber transceiver
support remote fault indication
Network Cables Copper port: Cat.5e recommended or higher up to 100m
Fiber port: MMF 50/125µm, 62.5/125µm, SMF 9/125µm
LEDs Power status, SFP ON status
Link status, Optical link status
DC Power Input Screwed terminator block: 2 pairs of +/- contacts
1 pair of power alarm relay output contacts
DC jack: -D 6.3mm/+D 2.0mm
Operating voltage range: +7 ~ +30VDC
Power Consumption 2W max. @30VDC power input
Dimension 28 x 82 x 95 mm (WxDxH)
Weight 240 g
Housing Enclosed metal with no fan
Mounting Support DIN-Rail mounting, Panel mounting
Environment Operating Temperature: -20°C ~ 70°C
Storage Temperature: -20°C ~ 85°C
Relative Humidity: 5% ~ 95% non-condensing
Approval FCC Class B, CE mark Class B, EN60950-1 safety