The media converter is designed to convert three different line rates of copper Ethernet signals to/from two line rates of fiber signals. It is used to extend the connection distance up to 70km or more between two Gigabit Ethernet devices via fiber cable transparently with no performance degradation. With the SFP connector design, the media converter not only supports existing variety of multimode and single mode fibers, but also preserves the flexibility to adapt to any change of your fiber network in the future. The converter also can support Bi-Di WDM and CWDM fiber network applications.
Key Features:
| Standard | IEEE 802.3i, 802.3u, 802.3z, 802.3ab, 802.3az |
| Copper Port | Shielded RJ-45, 10/100/1000Mbps, Full/Half duplex Auto-negotiation, Auto-MDI/MDI-X |
| Fiber Port | SFP connector with pre-configured SFP fiber transceiver 1G/100Mbps, Full duplex, Auto-negotiation FEFI (100FX), Remote fault signaling (1000FX) |
| Network Cables | Copper port: Cat.5e recommended or higher up to 100m Fiber port: MMF 50/125µm, 62.5/125µm, SMF 9/125µm |
| Port-to-Port Latency | 1µs (Cut-through latency at all frame size conversion) |
| LED Indication | Power status, port link status, port speed status |
| Mounting | Desktop, Wall, DIN-Rail (optional) |
| Power Input | Screwed terminal block: +/- contacts DC jack: -D 6.3mm/ +D 2.0mm Operating voltage range: +12V ~ +60VDC Consumption 2.4W max. @60V |
| Environment | Operating Temperature: -40ºC ~ 75ºC Storage Temperature: -40ºC ~ 85ºC Relative Humidity: 5% ~ 90% non-condensing |
| Dimension | 72.5 x 108 x 23 mm (WxDxH) |
| Approval | FCC Class A, CE mark Class A, VCCI Class A, CC-Link IE TSN |
