The media converter provides a great solution for connecting copper Ethernet and fiber Ethernet that supports multiple line rates of 10G/5G/2.5G/1Gbps capability. It is also equipped with Link Fault Pass-Through (LFPT) function. The LFPT function is useful for remote user when the link loss on one side of media converter can be passed to the other side, so that the near end can aware the fault condition that occurs at the far end behind two media converter connection.
Key Features:
• The device supports the following multi-rate and media conversion:
– 10GBASE-T to 10GBASE-R conversion
– 5GBASE-T to 5GBASE-R conversion
– 2.5GBASE-T to 2500BASE-X conversion
– 1000BASE-T copper to 1000BASE-X (without auto-negotiation support) fiber conversion
• Support auto-negotiation and Auto-MDI/MDI-X detection
• Support full wire speed conversion
• Support transparent conversion for any packet types with no packet length limitation
• Provide link fault pass through function
| Standard | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3an Copper interface: 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T Fiber interface: 10GBASE-R(XFI), 5GBASE-R, 2500BASE-X, 1000BASE-X (without auto-negotiation support) |
| Copper Port | Shielded RJ-45, Auto-negotiation, Auto-MDI/MDI-X 10G/5G/2.5G/1Gbps, Full/Half duplex |
| Fiber Port | SFP+ slot for SFP or SFP+ fiber transceiver 10G/5G/2.5G/1Gbps, Full duplex |
| Network Cables | Copper port: Cat.6a, 7 or higher for 10GBASE-T up to 70m, Cat.5e or higher for 5G/2.5G/1000BASE-T up to 100m Fiber port: MMF 50/125µm, 62.5/125µm, SMF 9/125µm |
| DIP SW | Link Fault Pass Through function setting DIP SW setting change will not take effect until next boot-up. |
| LED Function | Rule 1: Fiber port is always forced to link down when copper port is down. Rule 2: Fiber port link down forces copper port to link down when DIP SW is ON. Note: Single fiber cable failure events are not supported by the LFPT function. |
| LED Indication | Power status, Activity, Speed link status |
| Power | External Power 5V/1.5A |
| Power Consumption | 3.8W max |
| Housing | Enclosed metal with no fan |
| Dimension | 75 x 102 x 22.2 mm (WxDxH) |
| Environment | Operating Temperature: 0ºC ~ 50ºC Storage Temperature: -20ºC ~ 70ºC Relative Humidity: 0% ~ 90% non-condensing |
| MTBF | 216K hours |
| Approval | FCC Class B, CE mark Class B |
