KPW-BTPD

Industrial IEEE 802.3bt Splitter and Power Converters

KPW-BTPD

Industrial IEEE 802.3bt Splitter and Power Converters

KTI Network’s KPW-BTPD is a state-of-art PoE splitter that integrates both the latest approved IEEE 802.3bt PoE standard and KTI PoE++ technology. It supports PoE incapable network device by just using a single twisted pair cable for both power and data transmission.
Further, the splitter has built-in a DC-DC power converter that converts the power input over network cable to a lower voltage output for local use. The splitter series has two voltage options, 12VDC and 24VDC and two power levels, 60W and 90W each for selection. The splitter is also equipped with DIP SW that allows user to select one from nine different classes for demanding power from a remote PoE switched port or mid-span injector. This feature can support efficient power management at the advanced PSE side.
For industrial applications, the splitters can support panel mounting and come with standard bracket for Din-Rail mounting. To enhance application safety, the splitters are featured short-circuit protection, low voltage lock out, inrush current limit, thermal protection and high surge immunity rating.

Key Features:

  • IEEE 802.3bt, IEEE 802.3at and 802.3af PoE compliance
  • Support KTI high power PoE++ PSE devices
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T
  • Supports Alternative A or Alternative B PoE input over Cat.5/6
  • Provides PD class selection SW for supporting power management at PSE side
  • Embedded with isolated and high-efficient DC-DC power converter
  • Protections: short circuit/over power/over current/over temperature
  • High surge immunity up to 4KV

 

Standard IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T
PoE In Jack Shielded RJ-45
10BASE-T, 100BASE-TX, 1000BASE-T support
Power pins – Pin1/2/3/6 and Pin4/5/7/8 (support both)
LAN cable – Cat.5 or better
PoE Standard IEEE 802.3af Type 1, IEEE 802.3at Type 2, IEEE 802.3bt Type 3 & 4
Power Class Type 1 Class 0 ~ 3, Type 2 Class 4, Type 3 Class 5/6, Type 4 Class 7/8 (by
DIP SW setting)
PoE Input Voltage 36 ~ 57VDC
LAN Out Jack Shielded RJ-45
10BASE-T, 100BASE-TX, 1000BASE-T std.
LAN cable – Cat.5 or better
DC Output 2P European Terminal block – DC+/DC
DC Wire 12 ~ 22 AWG (1 meter max.)
LED Display PoE input status
Isolation RJ-45 vs. DC OUT lines, RJ-45 vs. Frame ground, DC OUT lines vs. Frame
ground
Protection Auto-recovery for short circuit, OCP, OPP, OTP
Housing Enclosed metal with no fan
Dimension 110 x 43.3 x 142 mm (LxWxH)
Mounting Support DIN-Rail, Panel mounting
Environmental Operating Temperature: -40°C ~ +70°C
Storage Temperature: -40°C ~ +85°C
Relative Humidity: 5% ~ 95% non-condensing
Approval FCC Class A, CE Mark Class A, IEC60950-1 safety
IEC 60068-2-27 Shock, IEC 60068-2-64 Vibration

Categories