KGS-1260/I

IEC 61850-3 IEEE 1613 Industrial Managed 12-Port L2 GbE Switches with 4 dual-speed SFP Slots

KGS-1260/I

IEC 61850-3 IEEE 1613 Industrial Managed 12-Port L2 GbE Switches with 4 dual-speed SFP Slots

The KGS-1260 is a 12-port industrial managed Gigabit Ethernet switch series which is featured with the
following communication ports:
>> Eight 10/100/1000Mbps Gigabit copper ports
>> Four dual-speed SFP slots for 100Base-FX 1000Base-X
>> One RS-232 console port

Product highlights :

  • Eight 10/100/1000Mbps RJ-45 and four dual-speed SFP slots
  • Four SFP slots support dual speed for 100BASE-FX and 1000BASE-X SFP transceivers
  • All copper ports support auto-negotiation and auto-MDI/MDI-X detection
  • Full wire speed forwarding for all 12 Gigabit switched ports
  • Supports 802.3x flow control for full-duplex and backpressure for half-duplex
  • Supports SFP with Digital Diagnostic Monitoring (DDM)
  • Powered via typical industrial power voltage DC 12V-60V
  • Provides Optical Power Alarm (OPA) function
  • Provides Automatic Laser Shutdown (ALS) function
  • Private MIB for DDM monitoring, Remote booting, and TFTP firmware update over SNMP

Management Features:

  • Management:
    HTTP/HTTPS/SSHv2/CLI telnet/CLI console/SNMP v1/v2c/v3/RMON
    DHCP/DHCPv6 client, DNS client. NTPv4
    IPv6 support, System Syslog, Configuration down/upload, Software upload
  • Security:
    NAS, 802.1X, MAC-based/Web/CLI authentication
    IP MAC binding, TACACS+, IP source guard
  • Layer 2:
    QoS, 802.1Q/MAC-based/Protocol-based/Private/IP subnet VLAN, Port Isolation
    Storm control for UC/MC/BC packets
    LACP port link aggregation
    Static MAC configuration
    IGMP v2/v3 snooping, MLD v1/v2 snooping, DHCP snooping
    Multiple Spanning Tree – MSTP. RSTP, STP
  • KTI’s Auto Multi-Ring (KAMR) Technology:
    Fast failover response time, Auto ring recovery when failure is repaired
    Supports up to six redundant rings, Works with RSTP network
    Supports ring member status monitoring for up to 100 units
Standard IEEE 802.3, 802.3ab, 802.3z, 802.3x, 802.1x, 802.1w, 802.1D, 802.1Q
Network Ports 8 10/100/1000Mbps Gigabit copper ports,
4 1G/100Mbps fiber ports
Copper Port Shielded RJ-45, 10/100/1000Mbps, auto-negotiation,
auto-MDI/MDI-X support
Fiber Port SFP connector
Interface: 1000BASE-X and 100BASE-FX support
Far end fault support for 100BASE-FX
Remote fault support for 1000BASE-X
Console Connector: Shielded RJ-45, Interface: RS-232
Network Cables 10/100/1000Mbps copper: Cat.5 up to 100m
Fiber port: 62.5/125µm, 50/125µm MM fiber, 9/125µm SM fiber
MAC Addresses Table with 8K entries
Buffer Memory 4Mbits
LED Indication Per unit: Power, Management status
Per port: Speed, link/activity status
Per SFP: Speed/link/activity status
Relay Output Alarm: power failure, specific port link fault, OPA, ALS
Interface: 3 terminal dry contacts (30VDC/1A max. or 120VAC/0.5A max.)
NO-Common-NC
DC Power Input Terminal block: 2 pairs of +/- contacts
Redundant power input VA+/-, VB+/-
Polarity reversal protection – shutdown
Operating voltage range: +12 ~ +60VDC
Power Consumption 10W max.
Housing Enclosed metal with no fan
Dimension 60 x 106 x 140 mm (WxDxH)
Mounting Support DIN-Rail, Panel Mounting (Optional)
Environment Operating Temperature: -30°C ~ 70°C
Storage Temperature: -40°C ~ 85°C
Relative Humidity: 5% ~ 95% non-condensing
Approval FCC/CE/VCCI Class A, LVD/IEC60950-1 safety,
EN 55032 emission, EN 55024 Immunity for industrial environment
EN 61000-3-2, EN 61000-3-3, IEC 60068-2-64 Vibration,
IEC 60068-2-27 shock 30G test, IEC 61850-3 EMC,
IEC 61850-3 environment, IEEE 1613

Categories