KGC-260

Industrial Managed 10/100/1000Base-T to Dual-speed Fiber Media Converter

KGC-260

Industrial Managed 10/100/1000Base-T to Dual-speed Fiber Media Converter

The KGC-260 is Gigabit Ethernet media converter series which provide the following features:
Data Conversion between different Media types and Speed
The media converter supports the following conversions:
– 1000Mbps (1000BASE-T) copper to/from 1000Mbps (1000BASE-X) fiber
– 100Mbps (100BASE-TX) copper to/from 1000Mbps (1000BASE-X) fiber
– 10Mbps (10BASE-T) copper to/from 1000Mbps (1000BASE-X) fiber
– 1000Mbps (1000BASE-T) copper to/from 100Mbps (100BASE-FX) fiber
– 100Mbps (100BASE-TX) copper to/from 100Mbps (100BASE-FX) fiber
– 10Mbps (10BASE-T) copper to/from 100Mbps (100BASE-FX) fiber

 

Key Features:

  • Tri-speed 10/100M/1Gbps copper to dual-speed 100M/1Gbps fiber conversion
  • Comply with IEEE 802.3, 802.3u, 802.3ab, 802.3z standard
  • Support full wire speed conversion for Gigabit copper to Gigabit fiber
  • Support auto-negotiation with link partners
  • Provide dual-speed SFP on fiber port for mounting variety of fiber options
  • Provide important LFPT (Link Fault Pass Through) media converter function
  • Support Jumbo frame conversion
  • Energy efficient ethernet (EEE) support
  • Alarm events relay output
  • Optical Power Alarm (OPA) function
  • Auto Laser Shutdown (ALS) function
  • Ideal solution for multimode, short reach up to long reach single mode fiber, Bi-Di applications
  • Web-based configuration management support
  • Support SNMP management

 

Standard IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.1ad, 802.3az, 802.1Q
Copper Port Shielded RJ-45, 10/100/1000Mbps, Full/Half duplex
Auto-negotiation, Auto-MDI/MDI-X
Fiber Port SFP connector with pre-configured SFP fiber transceiver
100Mbps/1Gbps Full duplex, Auto-negotiation
Far End Fault support
Network Cables Copper port: Cat.5e recommended or higher up to 100m
Fiber port: MMF 50/125µm, 62.5/125µm, SMF 9/125µm
LED Indication Unit: Power status
Per port: 1G/Link/Activity, 10-100/Link/Activity
Jumbo Frame size Up to 9.6K bytes
DC Power Input Screwed terminal block: DC+/ DC- contacts
Working voltage range: +12 ~ +30VDC
Polarity reversal protection
Relay Output Screwed terminal block: 3 dry contacts for NC & NO pairs
Contact rating: 30VDC/1A or 120VAC/0.5A
Alarm events: power failure, configured port link fault, OPA
Power Consumption 4.2W max.
Housing Enclosed metal with no fan
Environment Operating Temperature: -40°C ~ 75°C
Storage Temperature: -40°C ~ 85°C
Relative Humidity: 5% ~ 95% non-condensing
Dimension 40 x 80 x 95 mm (WxDxH)
Mounting Support DIN-Rail, Panel (optional)
MTBF 430K hours min.

Categories