KFC-241

10/100BASE-T to 100BASE-FX Media Converters

KFC-241

10/100BASE-T to 100BASE-FX Media Converters

The industrial 10/100BASE-TX to 100BASE-FX media converter series provides industrial strength Ethernet copper-to-fiber media conversion, allowing for 10Base-T-100Base-FX or 100Base-TX-100Base-FX over multi-mode or optional single-mode fiber optical media.

 

Key Features:

  • Support full wire speed conversion for 10/100Mbps speed and media types
  • Support auto-negotiation 10/100Mbps or forced mode on the copper port
  • Auto MDI/MDI-X crossover function on the copper port
  • Provide Link Fault Pass Through function
  • Transparent conversion to 802.1Q VLAN tagged packets
  • Provides Far End Fault function on FX (fiber) port
  • The optimal latency for 100M to 100M conversion
  • Two power interface types: screw terminal block and DC Jack
  • Low power consumption
  • DC power input options: +4.5 ~ +50VDC, 110VDC
  • Supports DIN rail mounting and optional screwed plane mounting
  • Compact design for easy installation in enclosure and chassis
  • Supports wide operating temperature range
  • Industrial-rated Emission and Immunity performance
Conversion 10BASE-T to 100BASE-FX, 100BASE-TX to 100BASE-FX
10/100BASE-T Auto to 100BASE-FX
Conversion Methods Cut-through for 100M to 100M with the smallest latency
Store-and-forward for 10M to 100M conversion
Auto mode-switching
Copper Port IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Shielded RJ-45 jacks with Auto MDI/MDI-X detection
Auto-negotiation for speed and duplex
Fiber Port (FX) IEEE 802.3u 100Base-FX compliant
Forced 100Mbps, Full duplex, Far end fault Function
Network Cables 10/100Mbps copper: Cat.5, 5e or higher up to 100m,
100BASE-FX: 62.5/125µm, 50/125µm MM fiber, 9/125µm SM fiber
Packet Size Up to 1600 bytes for 10M-to-100M conversion
No packet size limit for 100M-to-100M conversion
DC IN Voltage KFC-241-L: +4.5 ~ +50VDC
KFC-241-H: +110VDC with polarity protection
DC IN Connectors Industrial Terminal Block 3P: DC+, DC-, PE
DC Jack ( KFC-241-L)
Power Consumption KFC-241-L: 1.6W@+7.5V, 1.6W@+12V, 2W@+48V
KFC-241-H: 2.9W@110VDC
Housing Enclosed metal with no fan
Dimension KFC-241-L: 34 x 49 x 56mm (WxDxH)
KFC-241-H: 45.5 x 49 x 56mm (WxDxH)
Mounting Support DIN-Rail, Panel
Environment Operating temperature: -40°C ~ 70°C (Main device)
Storage temperature: -40°C ~ 85°C
Relative Humidity: 10%~90% non-condensing
Certification FCC Class A, CE mark Class A, LVD, TUV IEC 60950-1 safety, C-Tick

Categories