KGC-460-HP

Industrial Managed Multi-function GbE Media Converter with PoE+ Support

KGC-460-HP

Industrial Managed Multi-function GbE Media Converter with PoE+ Support

The KGC-460 series is an industrial managed Gigabit Ethernet device which is featured with the following network ports:
– Two 10/100/1000Mbps Gigabit copper ports
– Two dual-speed SFP slots for 100Base-FX 1000Base-X

The device is featured the function modes:
– Dual media converts mode
– Dual media converters sharing redundant fiber uplink mode
– Fiber to fiber media converter mode
– 4-port switch mode

 

Key Features:

  • Provides 2 10/100/1Gbps copper ports and 2 dual-speed SFP fiber port slots
  • Supports 802.3x flow control for full-duplex and backpressure for half-duplex
  • All copper ports support auto-negotiation and auto-MDI/MDI-X detection
  • Dual-speed SFP slots support 100BASE-FX and 1000BASE-X SFP
  • SFP featured with Digital Diagnostic Monitoring (DDM) support
    Multiple functions in one:
    – Dual media converts mode
    – Dual media converters sharing redundant fiber mode
    – Fiber to fiber media converter mode
    – 4-port switch mode
  • Link fault pass through (LFPT) featured for all media converter modes
  • Redundant ring function featured for 4-port switch mode
  • Supports Gigabit full wire speed bridging & forwarding performance
  • Jumbo frame support up to 9600 bytes
  • Alarm relay output for events of power failure and configured port link down
  • Green Ethernet power saving
  • 802.3az Energy Efficient Ethernet (EEE) support
  • Optional high power PoE PSE function on copper ports
Standard IEEE 802.3, 802.3ab, 802.3z, 802.3x, 802.3at, 802.1x, 802.1w, 802.1D, 802.1Q
Network Ports 2 10/100/1000Mbps Gigabit copper ports
2 1G/100Mbps SFP slots
Copper Port Shielded RJ-45, 10/100/1000Mbps, auto-negotiation, auto-MDI/MDI-X
Mini-GBIC SFP SFP connector, Interface: 1000BASE-X and 100BASE-FX support
Network Cables 10/100/1000Mbps copper: Cat.5, 5e UTP or higher up to 100m
SFP fiber: 62.5/125µm, 50/125µm MM fiber, 9/125µm SM fiber
Power over Ethernet IEEE 802.3at compliant (High power PoE)
30W max. at port output for Cat.5 distance of 100 meters
MAC Addresses 8K
LED Indication Per unit: Power, Management status
Per port: Speed, link/activity status
Per SFP: Speed/link/activity status
Per PoE port: PoE status
Relay Output Alarm: power failure, configured port link fault
Interface: 3 terminal contacts (30VDC/1A max. or 120VAC/0.5A max.)
DC Power Input Screwed terminal block: DC +/- contacts
Operating voltage range: +12 ~ +57VDC
Voltage for PoE support: +45 ~ +57VDC
Polarity reversal protection
Power Consumption 6W@56V max. (Full load with no PoE support)
66W@56V max. (Full load with 2 PoE+ max. output)
Housing Enclosed metal with no fan
Dimension 42 x 106 x 140 mm (WxDxH)
Mounting Support DIN-Rail, Panel Mounting (Optional)
Environment Operating Temperature: -40°C ~ 75°C
Storage Temperature: -40°C ~ 85°C
Relative Humidity: 5% ~ 95% non-condensing
Approval FCC Class A, VCCI Class A, CE mark Class A, TUV EN 60950-1 safety
EN 61000-6-4 emission, EN61000-3-2, EN61000-3-3, EN61000-6-2
Immunity for industrial environment,
IEC 60068-2-64 Vibration, IEC 60068-2-27 shock