KGC-300

1000Base-T to 1000Base-X Gigabit Media Converters

KGC-300

1000Base-T to 1000Base-X Gigabit Media Converters

The Gigabit media converter is designed to convert 1000Base-T signals to/from 1000Base-X fiber signals. It is used to extend the connection distance between two Gigabit Ethernet devices via fiber cable transparently with no performance degradation.

With the SFP (Mini-GBIC) connector design, the media converter not only supports existing variety of multimode and single mode fibers, but also preserves the flexibility to adapt to any change of your fiber network in the future. It also supports center chassis installation with optional power redundancy and management features when a larger fiber network is required. With pre-configured fiber transceivers, the converter also can support Bi-Di WDM and CWDM fiber network applications.

 

Key Features:

  • Comply with IEEE 802.3ab 1000Base-T, 802.3z 1000Base-SX/LX standard
  • Provide direct media conversion for Gigabit copper and Gigabit fiber
  • Support full wire speed conversion
  • Support transparent conversion of any packet types with no packet length limitation
  • Support auto-negotiation with link partners
  • Provide link fault pass through between copper and fiber link
  • Provide SFP on fiber port for mounting variety of fiber options
  • Support optional DIN-Rail installation
  • Support center chassis installation to achieve the advantages of central power, optional power
    redundancy and management
  • Ideal solution for multimode, short reach up to long reach single mode fiber, Bi-Di and CWDM
    applications
Standard IEEE 802.3ab, 802.3z
Copper Port Shielded RJ-45, 1000Mbps, Auto-negotiation capable, Auto-MDI/MDI-X
Fiber Port SFP connector with pre-configured SFP fiber transceiver
support remote fault indication
Network Cables Copper port: Cat.5e recommended or higher up to 100m
Fiber port: MMF 50/125µm, 62.5/125µm, SMF 9/125µm
Port-to-Port Latency 1µs (Cut-through latency for all frame sizes)
LED Indication Power status, SFP On status, Link status, Optical link status
Mounting Desktop, Wall, DIN-Rail (optional), Center chassis
Center Chassis Up to 16 units in one rack chassis with one central power
Support optional power redundancy and management
Power Input +5 ~ +12VDC (±5%)
Consumption:  2W max. @7.5V
Environment Operation Temperature: -5°C ~ 55°C
Storage Temperature: -40°C ~ 85°C
Relative Humidity: 5% ~ 90% non-condensing
Dimension 72.5 x 108 x 23 mm (WxDxH)
Approval FCC Class B, CE mark Class B