KC-351

PoE Powered 10/100BASE-TX to 100BASE-FX Media Converters

KC-351

PoE Powered 10/100BASE-TX to 100BASE-FX Media Converters

The 10/100BASE-TX to 100BASE-FX media converter series provides a media conversion allowing high-speed integration of fiber optic and twisted-pair segments. With 10BASE-T and 100BASE-TX support, the converters provide seamless translation between Ethernet and Fast Ethernet networks.Because of 802.3af compliance, the converters can draw the power via Cat.5 cable connected to a PoE PSE switch or mis-span injector in addi-tion to being powered by typical external power adapter,. This feature makes the converter ideal for remote areas of a network without AC power outlets.

 

Key Features:

  • Convert speed and media type with full wire speed conversion
  • Support 10Mbps and 100Mbps speed on TP connections
  • Auto-negotiation and auto MDI/MDI-X detection function
  • Link fault pass through function
  • Provide manual configuration settings for TP port to supportconnection to non-auto-negotiation devices
  • Transparent to 802.1Q VLAN tagged packets
  • Far End Fault function on FX port
  • Support wide range of fiber options on the FX port
  • Provide user-inaccessible settings for specific system applications
  • Low power consumption
  • IEEE 802.3af compliant PoE PD (Powered Device) design
TP Port IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3af PD
Shielded RJ-45 jack with auto MDI/MDI-X detection
Auto-negotiation for speed and duplex auto detection
Forced mode with speed and duplex settings
Speed for 10Mbps or 100Mbps, Full-duplex or half-duplex support
FX Port IEEE 802.3u 100Base-FX compliant
Forced 100Mbps, Full duplex (factory default)
Far end fault Function
Cable Cat.5, 5e or higher UTP cable
MMF -62.5/125µm, 50/125µm, SMF -9/125µm
LEDs KC-350/351: Power status
TP Port: Link/Act, Speed, Duplex status,
FX Ports: Link/Act status, Fiber signal detected

KC-351: Remote TP Ports: Link, Speed, Duplex status

Configuration Switches Accessible Settings:
– KC-350/351: TP mode, TP duplex, TP speed, Link fault pass through
– KC-351: Auto status report
Packet Size Up to 1522 bytes for store-and-forward mode
No packet size limit for smart-forward mode (100-to-100)
Power Input PoE via Cat.5 on RJ-45 from PSE switch or PoE mid-span injector
DC jack via external AC power adapter
PoE IEEE 802.3af PD compliant
Input voltage: 36 ~ 57VDC via Cat.5
Power classification: Class 1
Power reception: via TP RJ-45 Pin 1,2,3,6 or Pin 4,5,7,8
Environment Operating Temperature: -5°C ~ 50°C
Storage Temperature: -20°C ~ 80°C
Relative Humidity: 5% ~ 95% non-condensing
Weight KC-350: 210g
KC-351: 213g
Dimension 108 x 72.5 x 23 mm (WxDxH)
Operating Voltage +7V ~ +57VDC input, consumption: 2W max.
Approval FCC Class B, CE mark Class B, IEC60950-1 safety