KGC-352

PoE Powered Gigabit Ethernet Media Converters 1000BASE-T to 1000BASE-SX/LX

KGC-352

PoE Powered Gigabit Ethernet Media Converters 1000BASE-T to 1000BASE-SX/LX

The 1000BASE-T to 1000BASE-SX/LX media converter series provides1000Mbps Gigabit Ethernet copper-to-fiber media conversion, allowing for 1000Base-T-1000Base-X over multimode or optional single-mode fi-ber optical media.

 

Key Features:

  • Gigabit copper to fiber conversion: 1000Base-T-to-1000Base-SX/LXover multimode or single-mode fiber
  • SFP design : For flexibility, an SFP (Mini-GBIC) connector  is providedfor the fiber port to accommodate any type of SFP fiber transceiverwhen needed.
  • Support full wire speed copper to fiber conversion
  • Auto MDI/MDI-X detection function on the copper port
  • Auto-negotiation support
  • Plug and play : no configuration settings is required
  • Link Fault Pass Through : this function allows link fault status passesthrough between copper link and fiber link transparently.
  • Far End Fault function on fiber port
  • Transparent conversion to any type of packet frame
  • No packet length limitation
  • Diversified mounting support : desktop mounting, wall mounting,optional Din-Rail support
  • Support wide range of fiber options : multimode fiber, single modefiber (short reach up to long reach), Bi-directional single fiber, and CWDM optical
  • Low power consumption
  • IEEE 802.3af compliant PoE PD (Powered Device) design
Standard IEEE 802.3ab, 802.3z, IEEE 802.3af
Copper Port Shielded RJ-45, 1000Mbps, Auto-negotiation capable, Auto-MDI/MDI-X
Fiber Port SFP connector with pre-configured SFP fiber transceiver
Far End Fault support
Network Cables Copper port: Cat.5e recommended or higher up to 100m
Fiber port: MMF 50/125µm, 62.5/125µm, SMF 9/125µm
LED Indication Power status, SFP On status, Link status, Optical link status
Mounting Desktop, Wall, DIN-Rail (optional)
Power Input PoE via Cat.5 on RJ-45 from PSE switch or PoE mid-span injector
DC jack via external AC power adapter
PoE IEEE 802.3af PD compliant
Input voltage: 36VDC ~ 57VDC via Cat.5
Power classification: Class 1
Power reception: via TP RJ-45 Pin 1,2,3,6 or Pin 4,5,7,8
Environment Operation Temperature: -5°C ~ 55°C
Storage Temperature: -45°C ~ 85°C
Relative Humidity: 5% ~ 95% non-condensing
Dimension 72.5 x 108 x 23 mm (WxDxH)
Operating Voltage +7VDC ~ +57VDC input, consumption: 2W max.
Approval FCC Class A, CE mark Class A, IEC60950-1 safety