IEC 61850-3 IEEE 1613 Industrial Managed 12-Port L2 GbE Switches with 4 dual-speed SFP Slots


Industrial Managed 24-Port L2/L3 Gigabit Ethernet Switches with PoE+ features


KGS-086x Series
IP65/67 Managed Gigabit Ethernet and Fast Ethernet L2 Switches with PoE+ Options
  Web Smart 10/100/1000Base-T to 1000Base-X
Gigabit Media Converter
    Firmware v1.01

  360X Product View

The KGC-310 is Gigabit Ethernet media converter series which provide the following features:
Data Conversion between different Media types and Speed
The media converter supports the following conversions:
•1000Mbps (1000BASE-T) copper to/from 1000Mbps (1000BASE-X) fiber
•100Mbps (1000BASE-TX) copper to/from 1000Mbps (1000BASE-X) fiber
•10Mbps (10BASE-T) copper to/from 1000Mbps (1000BASE-X) fiber

  More Information    

Product Hightlights :

  • Tri-speed 10/100/1000Mbps copper to 1000M fiber conversion
  • Comply with IEEE 802.3, 802.3u, 802.3ab, 802.3z standard
  • Support full wire speed conversion for Gigabit copper to Gigabit fiber
  • Support auto-negotiation with link partners
  • Provide SFP on fiber port for mounting variety of fiber options
  • Provide loop back test function with link partner over fiber link
  • Provide monitoring function for remote link partners copper link status
  • Support optional DIN-Rail installation
  • Support center chassis installation to achieve the advantages of central power, optional power
    redundancy and network management
  • Ideal solution for multimode, short reach up to long reach single mode fiber, Bi-Di applications
  • Web-based configuration management support
  • Port operating mode, flow control and status monitoring functions
  • Tagged or untagged packet filtering
  • 802.1Q VLAN tag stripping and tagging
  • Support Q-in-Q application with double tag capability
  • Support SNMP trap for port link change
  • Support Jumbo frame conversion

Standard :

  • IEEE 802.3, 802.3u, 802.3ab, 802.3z

Network Ports :

  • Shielded RJ-45, 10/100/1000Mbps, Full/Half duplex
    Auto-negotiation, Auto-MDI/MDI-X
  • SFP connector with pre-configured SFP fiber transceiver
    1000Mbps Full duplex, Auto-negotiation
    Far End Fault support

Power :

  • Power Input - +5 ~ +12VDC (+/-5%)
  • Power Consumption - 1.6W max. @5V
  • Less than 0.6W when no link ports under power saving mode

Dimension :

  • 108 x 72.5 x 23 mm (WxDxH)

Copyright © Katron Technologies Inc. All rights reserved BEST VIEW : IE5.0 800X600 Pixel or higher
Phone : +886-2-2698-3878    Fax : +886-2-2698-3873    E-mail :